35 years' experience and customer care, printing since 1992
all our plastic cards are proudly printed in England Proudly printed in England all our plastic cards are proudly printed in England
Tel 01948 411 867 Email: sales@cpcards.co.uk We often reply within minutes 9-5 Mon-Fri

Plastic Cards with Holes or Slots

A plastic card with a slot hanging from a lanyard clip, then a card with a hole hanging from a hook

Use: Holes or slots can be used for a variety of purposes, for example with a lanyard or to attach to a product / sales item.

Positioning: Holes are 6mm in from the edge. Slots are usually positioned in the centre of one of the edges.

Size: Holes are 5mm in diameter. Slots are 15mm x 3mm.

Not available on: EcoTough cards, Plastic-Free Board cards or RFID cards. On an RFID card, a hole could cut through the antenna inside the card.

Top Tip: Try incorporating the hole as part of the design to disguise it.

On an event pass, our guide to designing an event pass shows where the hole and the slot go, to scale.